I made these seahorses with cotton yarn and a small crochet hook so the stitches stay firm and the finished pieces remain lightweight. The pattern is worked in small sections, with the tail crocheted separately and attached to the lower body.

The instructions below cover the seahorse body, snout, curled tail, belly, fins, facial details, and final earring assembly. You can make the pair in matching colors or use different shades for a more colorful look.

Materials

• Cotton yarn in your chosen colors
• 1.5–2.0 mm crochet hook
• Small black beads or black embroidery thread for the eyes
• A small amount of polyester fiberfill
• Fishhook earring findings
• Small jump rings
• Yarn needle
• Scissors
• Small pliers for attaching and closing the earring findings

Cotton yarn works well for small crochet jewelry because it keeps the stitches neat and gives the seahorse a defined shape. A smaller hook also helps create a tight fabric so the stuffing does not show through.

Choose lightweight earring findings so the finished earrings remain comfortable to wear.

Crochet Abbreviations

This pattern uses US crochet terms.

• MR — Magic Ring
• sc — Single Crochet
• hdc — Half Double Crochet
• dc — Double Crochet
• inc — Increase
• dec — Decrease
• sl st — Slip Stitch
• ch — Chain
• st(s) — Stitch(es)
• FO — Fasten Off

The seahorse is worked mainly in continuous rounds unless otherwise stated. Use a stitch marker to keep track of the beginning of each round.

Pattern Notes

• Keep your stitches tight and even so the small pieces hold their shape.
• Add only a small amount of fiberfill because these are intended to be lightweight earrings.
• Leave yarn tails long enough to sew the small pieces securely.
• Make two seahorses for a matching pair.
• Check the crochet pieces and jewelry connections before wearing the finished earrings.

Seahorse Body

The head, upper body, and lower body are worked as one continuous piece in the main seahorse color. Work in continuous rounds and use a stitch marker to mark the beginning of each round.

Head and Upper Body

Round 1: 6 sc into a magic ring. (6)
Round 2: inc around. (12)
Round 3: (1 sc, inc) around. (18)
Rounds 4–6: sc around. (18)
Round 7: (2 sc, dec) around. (12)
Rounds 8–10: sc around. (12)

Add a very small amount of fiberfill to the head and upper body. Add it gradually and avoid overstuffing, as the finished earring should remain lightweight.

Keep the opening accessible for the next sections of the pattern.

Snout

Continue from the front of the head to form the small snout.

Chain 3. Starting in the second chain from the hook, work 1 sc in each of the next 2 chains. (2)

Slip stitch into the next stitch of the head to secure the snout to the body.

Fasten off, leaving a yarn tail for sewing. Use the tail to secure the base of the snout and gently shape it so it sits neatly at the front of the head.

Neck and Lower Body

Continue working directly from Round 10 without fastening off.

Round 11: sc around. (12)
Round 12: (2 sc, dec) around. (9)
Rounds 13–14: sc around. (9)

Add only a tiny amount of fiberfill if the lower body needs more shape. Keep it lightly stuffed so the finished earring remains comfortable and lightweight.

Do not overstuff the lower body, as the stitches should remain even and the tail will be shaped from this section.

Curled Tail

The tail is made as a short crocheted chain and attached to the lower body. It is then curled inward to create the seahorse shape.

Chain 10.

Starting in the second chain from the hook, work 1 sc in each chain across. (9)

Fasten off, leaving a long yarn tail for sewing.

Gently curl the crocheted chain inward with your fingers. Using the yarn tail and a yarn needle, sew the end of the tail to the lower body so it stays in a small curl.

Make a few additional stitches at the base if needed to keep the tail securely attached. Do not pull the yarn too tightly, as this can flatten or distort the curl.

Weave in the remaining yarn end securely.

Belly

Use a contrasting cream or white yarn for the belly.

Chain 6.

Row 1: Starting in the second chain from the hook, sc across. (5)

Row 2: Ch 1, turn, sc across. (5)

Row 3: Ch 1, turn, sc across. (5)

Row 4: Ch 1, turn, sc across. (5)

Fasten off and leave a yarn tail long enough for sewing.

Place the belly piece on the front of the seahorse, starting below the head and following the line of the body toward the lower section. Center it before sewing.

Sew the belly to the body with small stitches around the edges. Keep the stitches close to the edge of the belly piece so the sewing remains neat.

Fins

Use the main seahorse color.

Make 2 fins.

For each fin:

Chain 5.

Starting in the second chain from the hook, work:

1 sc, 1 hdc, 1 dc, 1 sc. (4)

Fasten off and leave a yarn tail for sewing.

Place one fin on each side of the back of the seahorse body. Position them at a similar height and angle before sewing.

Sew each fin securely to the body with small stitches. Keep the fins flat against the body and weave in the remaining yarn ends.

Face and Head Details

Eyes

Use small black beads or black embroidery thread for the eyes.

Place one eye on each side of the head, keeping both eyes at the same height. Before sewing, check the position from the front and make small adjustments if necessary.

If using beads, sew them securely with black thread and make sure there are no loose ends. For a simpler option, embroider small eyes directly onto the head.

Head Details

Use the main yarn to make a few small stitches around the top of the head or near the snout if needed to define the shape.

Keep these stitches flat and secure. Avoid adding bulky details, as the seahorse is designed to remain small and lightweight.

Assembly

Before attaching the earring findings, check that the body, tail, belly, fins, and facial details are securely sewn in place.

1. Weave in and trim any loose yarn ends.
2. Compare the two seahorses if you are making a pair. Check that their size, tail direction, and placement of the facial details are similar.
3. Use a small jump ring to connect the top of each seahorse to a fishhook earring finding.
4. Close the jump ring completely with small pliers so there is no visible gap.
5. Gently check the connection by pulling the seahorse downward before wearing the earrings.

Keep the finished earrings lightweight. Avoid adding large or heavy decorative pieces that could make them uncomfortable to wear.

Helpful Tips

• Keep your stitches tight and even so the small body and tail keep their shape.
• Add fiberfill little by little. The head and body only need enough stuffing to hold their shape.
• Check the position of the belly and fins before sewing them permanently.
• When shaping the tail, curl it gently instead of pulling the yarn tightly.
• Leave enough yarn at the ends of small pieces so you can sew them securely.
• If making a pair, compare the two seahorses as you work so they remain similar in size and shape.
• If you use beads for the eyes, sew them firmly and check them before wearing the earrings.
• Close the jump rings completely and check each connection before wearing the finished pair.

Safety Note

These crochet seahorse earrings are designed as a decorative jewelry accessory.

Check the jump rings, earring findings, and crocheted pieces before wearing them. Make sure all connections are secure and that no part is loose or damaged.

Small beads and other small components can be choking hazards. Keep unfinished pieces and loose components away from young children and pets.

Stop using the earrings if any crochet or metal component becomes damaged or loose.

Frequently Asked Questions

Can I use different yarn colors?

Yes. You can change the seahorse, belly, and eye colors to match your preference. Using two different colors for the pair can also create an interesting look.

Can I make the earrings larger?

Yes. You can use thicker yarn and a larger crochet hook to make a larger seahorse. Keep in mind that increasing the size will also increase the weight, which may make the earrings less comfortable to wear.

Can I make the eyes without beads?

Yes. Small embroidered eyes are a good alternative to beads and also remove the need for an additional small component.

Can I use the seahorse as a necklace charm?

Yes. The finished seahorse can be used as a small necklace or bracelet charm. Use a suitable jewelry finding and make sure the connection is securely attached before wearing it.

Do I have to make two seahorses?

No. You can make a single seahorse and use it as a charm or a decorative earring. If you are making earrings, make two pieces and compare them before attaching the findings so they look similar as a pair.

Copyright and Terms of Use

This crochet seahorse earrings pattern and the accompanying photos are original content by Amyliva Handmade.

You may make finished seahorse earrings for yourself, as gifts, or for sale, with credit to Amyliva Handmade as the pattern designer.

Please do not copy, repost, translate, publish, resell, or redistribute this pattern or its photos as your own work. You may share the pattern by linking to the original Amyliva Handmade post.

Thank you for respecting the original pattern and the work that goes into creating and sharing it.

The post Amigurumi Seahorse Earrings – Free Crochet Pattern first appeared on Amyliva.