The finished scarecrow can be used as a keychain, bag charm, or small seasonal decoration. You can keep the colors shown in the pattern or change them to match your own project.

In this guide, you’ll find the materials, crochet abbreviations, round-by-round instructions, assembly steps, and a few tips for working with small amigurumi pieces.

Materials

Before you begin, prepare the following materials:

• Brown yarn for the hat
• Skin-tone yarn for the head
• Green yarn for the shirt and arms
• Blue or navy yarn for the pants and legs
• Yellow yarn for the straw details
• Orange yarn for the nose
• 2–2.5 mm crochet hook, or a size that gives you firm stitches
• 6–8 mm safety eyes
• Polyester fiberfill
• Small keychain ring
• Tapestry needle
• Scissors
• Stitch marker

The finished size will depend on your yarn, hook size, and crochet tension.

Use a hook that creates firm stitches so the stuffing does not show through the fabric. A stitch marker is also helpful because the main pieces are worked in continuous rounds.

If the keychain is intended for a young child, use embroidered eyes instead of plastic safety eyes and make sure all sewn and attached parts are securely fastened.

Crochet Abbreviations

This pattern uses standard US crochet terms.

• MR – Magic Ring
• sc – Single Crochet
• inc – Increase: work 2 sc in the same stitch
• dec – Decrease: crochet 2 stitches together
• ch – Chain
• sl st – Slip Stitch
• ( ) × N – Repeat the instructions inside the parentheses N times

The number at the end of each round shows the total number of stitches you should have after completing that round.

The head, body, and hat are worked in continuous rounds unless otherwise stated. Use a stitch marker to keep track of the beginning of each round.

Head – Skin-Tone Yarn

Work the head in continuous rounds using skin-tone yarn. Do not join the rounds with a slip stitch.

R1: 6 sc in a magic ring. (6)

R2: inc in each stitch around. (12)

R3: (sc, inc) × 6. (18)

R4: (2 sc, inc) × 6. (24)

R5: (3 sc, inc) × 6. (30)

R6: (4 sc, inc) × 6. (36)

R7: (5 sc, inc) × 6. (42)

R8: (6 sc, inc) × 6. (48)

R9–R16: sc around. (48)

Insert the safety eyes between R12 and R13, leaving approximately 7–8 stitches between them.

Using orange yarn, embroider a small triangular nose around R11. Add a small smile with dark embroidery thread approximately two rounds below the eyes.

Begin adding fiberfill gradually as you continue.

R17: (6 sc, dec) × 6. (42)

R18: (5 sc, dec) × 6. (36)

R19: (4 sc, dec) × 6. (30)

R20: (3 sc, dec) × 6. (24)

R21: (2 sc, dec) × 6. (18)

R22: (sc, dec) × 6. (12)

R23: dec × 6. (6)

Add any remaining fiberfill and make sure the head is evenly shaped.

Fasten off, leaving a long yarn tail. Using a tapestry needle, weave the yarn tail through the front loops of the remaining 6 stitches and gently pull to close the opening. Secure and weave in the end.

Body – Green Yarn

Using green yarn, work the body in continuous rounds.

R1: 6 sc in a magic ring. (6)

R2: inc in each stitch around. (12)

R3: (sc, inc) × 6. (18)

R4: (2 sc, inc) × 6. (24)

R5: (3 sc, inc) × 6. (30)

R6: (4 sc, inc) × 6. (36)

R7–R10: sc around. (36)

R11: (4 sc, dec) × 6. (30)

R12–R14: sc around. (30)

R15: (3 sc, dec) × 6. (24)

R16: (2 sc, dec) × 6. (18)

R17: (sc, dec) × 6. (12)

R18: dec × 6. (6)

Add fiberfill gradually as you work. Shape the body with your fingers and avoid overfilling it.

Fasten off, leaving a long yarn tail for sewing. Using a tapestry needle, weave the yarn tail through the front loops of the remaining 6 stitches and gently pull to close the opening.

Leave enough of the yarn tail to attach the body securely to the head during assembly.

Legs (Make 2) – Blue Yarn

Using blue yarn

R1: 5 sc in a magic ring. (5)

R2: inc in each stitch around. (10)

R3–R6: sc around. (10)

Add a small amount of fiberfill to the lower part of each leg. Do not overstuff.

Fasten off, leaving a long yarn tail for sewing.

Sew the legs securely to the bottom of the body, checking from the front that they are positioned evenly.

For the straw detail, cut several short pieces of yellow yarn. Tie or sew them securely near the bottom of each leg, then trim the ends to the desired length.

Arms (Make 2) – Green Yarn

Using green yarn:

R1: 4 sc in a magic ring. (4)

R2: inc in each stitch around. (8)

R3–R7: sc around. (8)

Fasten off after R7, leaving a long yarn tail for sewing.

The arms can be left unstuffed. If you want them to have more shape, add only a small amount of fiberfill.

Sew the arms securely to the sides of the body around R13–R14. Check their position from the front before sewing them permanently.

For the straw detail, cut several short pieces of yellow yarn and attach them securely to the ends of the arms. Trim the yarn to an even length.

Hat – Brown Yarn

Using brown yarn, work the hat in continuous rounds.

R1: 6 sc in a magic ring. (6)

R2: inc in each stitch around. (12)

R3: (sc, inc) × 6. (18)

R4: (2 sc, inc) × 6. (24)

R5: (3 sc, inc) × 6. (30)

R6: (4 sc, inc) × 6. (36)

R7–R9: sc around. (36)

Hat Brim

R10: Working in the front loops only (FLO), (5 sc, inc) × 6. (42)

R11: (6 sc, inc) × 6. (48)

R12: (7 sc, inc) × 6. (54)

Fasten off and weave in the yarn end.

Straw Hair and Shirt Detail

Cut several short pieces of yellow yarn and attach them around the top edge of the head to create the scarecrow’s straw hair.

For an optional shirt detail, embroider a small yellow X on the front of the green body using yellow yarn or embroidery thread.

Assembly and Finishing

Before sewing the pieces permanently, place the head, arms, legs, and hat on the body and check their positions from the front and side.

Attach the Head

Sew the head securely to the top of the body using the long yarn tail left from the head. Work through several stitches around the join so the head is firmly attached.

Attach the Arms and Legs

If you have not already attached the arms and legs, sew the arms to the sides of the body around R13–R14.

Sew the legs evenly to the bottom of the body. Check their position from the front before securing them permanently.

Add the Hat and Straw Hair

Place the brown hat over the top of the head, positioning it so the yellow yarn pieces used for the straw hair remain visible.

Sew the hat securely to the head if needed. Do not rely on the hat simply sitting on top of the head if the finished piece will be used as a keychain.

Attach the Keychain Ring

Attach the small metal keychain ring securely to the top of the hat.

You can sew the ring directly to the stitches or create a small yarn loop and attach the ring to the loop.

Check the connection carefully before using the finished keychain. All attached parts should be firmly secured.

Final Check

Weave in any remaining yarn ends and trim the excess.

Check the head, arms, legs, hat, straw details, and keychain ring to make sure everything is securely attached.

Care

Gently hand wash the finished piece with mild soap and cold water when needed. Do not wring or twist it. Reshape it gently and allow it to air dry completely.

Frequently Asked Questions

Can a beginner make this scarecrow keychain?

Yes. The pattern uses basic stitches such as single crochet, increases, decreases, and a magic ring. Working with small pieces may take a little practice, especially when sewing the parts together.

Can I use a different type of yarn?

Yes. Cotton or cotton-blend yarn works well for amigurumi because it gives clear stitch definition and helps the finished piece keep its shape. You can also use acrylic yarn. Keep in mind that changing the yarn weight or hook size will change the finished size.

How can I make the keychain smaller?

Use thinner yarn together with a smaller crochet hook. The finished size will depend on the yarn, hook, and your crochet tension.

How do I keep the pieces from coming loose?

Leave sufficiently long yarn tails and sew the pieces through several stitches. Pay particular attention to the keychain ring, as it will be under more stress during regular use.

Can I change the colors?

Yes. You can change the colors of the hat, shirt, pants, or straw details to create a different scarecrow design. Changing the colors will not affect the stitch counts.

Can I use this pattern without a keychain ring?

Yes. The finished scarecrow can also be used as a small amigurumi figure or seasonal decoration. Simply leave out the keychain ring during assembly.

Pattern Usage

This is a crochet pattern created for personal use and learning.

Please do not copy, reproduce, translate, sell, or republish the written pattern or its instructions as your own content. If you would like to share this pattern, please link to the original article on Amyliva Handmade.

You may modify the colors or details when making your own project. Photos and written instructions from this page may not be used on other websites or social media as your own content.

If you make this pattern as a fan-inspired project, please remember that the finished design is based on a scarecrow character concept and should not be presented as an original character owned by Amyliva Handmade.

The post Easy Amigurumi Scarecrow Keychain – Free Crochet Pattern first appeared on Amyliva.

I like this project because the flowers are small enough to make in a short time, and they can be used in several different ways. They also work well for using up small amounts of leftover cotton yarn from other crochet projects.

Project Details

• Skill level: Easy
• Crochet terms: US terms
• Project type: Crochet flower magnet
• Crochet time: About 30–60 minutes per flower, depending on crochet speed
• Main techniques: Magic ring, single crochet, double crochet, increases, chains, slip stitches, joining, stuffing, and attaching a magnet
• Construction: 2 crocheted flower layers joined together with a small amount of fiberfill between them

What You’ll Need

• Cotton yarn in two contrasting colors (one for the center and one for the petals)
• 2.5 mm crochet hook
• Polyester fiberfill
• Small round magnets
• Yarn needle
• Scissors
• Hot glue or strong craft glue

Abbreviations

This pattern uses US crochet terms:

• MR — magic ring
• ch — chain
• sc — single crochet
• dc — double crochet
• inc — increase
• sl st — slip stitch

Crochet Flower Pattern

This pattern is worked in US crochet terms and uses basic stitches. It is suitable for beginners who are comfortable with working in the round and making simple increases.

Pattern Notes

• Make 2 identical crochet flowers for each finished magnet. The two layers are joined together during assembly to create a lightly padded flower.
• The center is worked in continuous rounds. Use a stitch marker if you find it difficult to keep track of the beginning of each round.
• The center has 18 stitches after Round 3. The petal section uses these stitches to create 6 evenly spaced petals.
• Keep your tension consistent when making both flower layers so they stay close in size and the petals line up during assembly.
• When making the petals, work each petal in the correct sequence around the center rather than skipping or adding extra stitches.
• Add only a small amount of fiberfill between the two layers. Too much stuffing can make the flower bulky and may make it difficult to join the edges evenly.
• Before attaching the magnet, check the back of the flower and make sure the two layers are securely joined.
• If using glue to attach the magnet, allow the glue to dry completely according to the product instructions before handling or using the finished magnet.
• The finished size may vary depending on your yarn, hook size, and crochet tension.

Center

Use the first yarn color for the flower center.

Round 1: Make a magic ring and crochet 8 sc into the ring. (8 sts)

Round 2: Increase in each stitch around. (16 sts)

Fasten off, leaving a short yarn tail. Weave in the end securely before starting the petals.

You should now have a small, flat crochet circle with 16 stitches around the outer edge. These 16 stitches will be used to create 8 evenly spaced petals.

Petals

Use the second yarn color for the petals.

Join the petal color with a slip stitch in any stitch around the outer edge of the center.

The flower has 8 petals worked around the 16-stitch center.

Repeat the following sequence 8 times:

Work (2 dc, ch 2, 2 dc) in the next stitch, then sl st in the following stitch.

Continue around the center until all 8 petals are completed.

Fasten off and weave in the yarn ends.

Assembly

Make 2 identical crochet flowers before starting the assembly.

1. Place the two flowers together with the right sides facing outward. Match the center and line up all 8 petals as closely as possible.
2. Starting between two petals, join the two flower layers by working single crochet through both layers around the outside edge. Follow the shape of each petal and make sure you work through both layers evenly.
3. As you join the layers, add a small amount of polyester fiberfill between them. Spread the stuffing toward the center and into the petals without overfilling the flower.
4. Continue joining around the entire flower, adding small amounts of fiberfill as needed. Keep the petals aligned as you work.
5. When the two layers are completely joined, fasten off and weave in the yarn end securely. Check the edge and make sure there are no large gaps between the layers.
6. Turn the flower over and position the small round magnet in the center of the back. Apply a small amount of strong craft glue or hot glue to the magnet and press it firmly against the crochet fabric.
7. Allow the glue to dry completely according to the product instructions before using the flower. Gently test the magnet and its attachment before placing the finished flower on a magnetic surface.

The finished flower should have a lightly padded center and clearly defined, rounded petals.

Safety Note

These flower magnets contain small parts and magnets, which can be a choking hazard if swallowed.

Keep them away from young children and pets. Magnets can also be dangerous if swallowed, so store finished magnets safely when they are not in use.

Use these crochet flowers as decorative magnets and keep them away from medical devices that may be affected by magnets.

Ways to Use Your Crochet Flower Magnets

These small crochet flowers can be used in several simple ways around the home or as handmade gifts.

• Fridge decoration: Use them to add a small handmade detail to your refrigerator or other suitable magnetic surface.
• Office decoration: Attach a flower to a magnetic board or other compatible surface to brighten up a workspace.
• Small handmade gifts: Make a few flowers in different colors and give them as small handmade presents.
• Party favors: Crochet several flowers in colors that match a celebration or event and use them as simple handmade favors.
• Gift wrapping: Attach a flower magnet to a wrapped gift as an extra decorative detail. The recipient can use it afterward as a magnet.
• Seasonal decorations: Change the yarn colors to create flowers for spring, summer, birthdays, or other occasions.

Beginner Tips

• Use a stitch marker at the beginning of each continuous round so you do not lose your place.
• Count the stitches after each round. The center should have 18 stitches before you start the petals.
• Keep your tension consistent when making the two flower layers. If one layer is noticeably larger, the petals may not line up during assembly.
• When working the petals, count them as you go. You should have 6 petals around the center.
• If your petals look uneven, check that you are following the same stitch sequence for each petal.
• Add the fiberfill a little at a time. Small amounts are easier to spread evenly between the two layers.
• Before gluing the magnet, make sure the back of the flower is completely assembled and the edge is securely closed.
• If you are using hot glue, handle the glue carefully and allow it to cool and set before testing the magnet.
• Try making the center and petals in different color combinations. Small amounts of leftover cotton yarn work especially well for this project.

Frequently Asked Questions

Can I make these flower magnets with a different yarn?

Yes. Cotton yarn works well because it gives the flower a firm stitch definition, but you can use another yarn weight if you prefer. Keep in mind that the finished flower may be larger or smaller. Adjust the hook size if needed to suit your yarn.

Can I make the flower without stuffing?

Yes. The flower can be made without fiberfill, but the two layers will be flatter. Adding a small amount of stuffing gives the flower a slightly raised, soft shape.

Can I use a different size magnet?

Yes. You can use a different magnet size as long as it fits securely on the back of the flower. A magnet that is too large or heavy may make the flower difficult to keep in place.

How many flowers can I make from one skein of yarn?

The number will depend on the yarn weight, skein size, and how much yarn you use for each flower. Because these flowers are small, they are a useful project for using leftover yarn.

Can I make the flowers in different colors?

Yes. You can use different colors for the center and petals or make each flower a different combination. This is an easy way to create a set of flowers for different seasons or occasions.

Can I make the flower without a magnet?

Yes. Simply leave out the magnet and use the finished crochet flower as a small decoration, gift embellishment, or craft project.

Terms of Use

This crochet pattern and the photographs on this page are the original work of Amyliva Handmade.

You may make finished crochet flower magnets for personal use, as gifts, or for sale in small quantities. If you share or sell a finished flower magnet, please credit Amyliva Handmade as the designer.

Please do not copy, repost, translate, redistribute, or publish this pattern or the photographs as your own. Do not reproduce the written instructions on another website, social media page, or in a video.

If you would like to share this pattern with others, please share the original Amyliva Handmade link instead of copying the instructions or photographs.

The post Crochet Flower Magnets – Free Crochet Pattern & Tutorial first appeared on Amyliva.