The snowflake uses a small amount of fingering or 4-ply cotton yarn, making it a useful project for leftover yarn. After crocheting, the finished piece can be blocked to help define the shape and keep the 12-point design flat.

You can make the snowflake in white, cream, icy blue, or another color that suits your holiday decorations. A small thread or ribbon loop can be added to turn it into a hanging ornament.

Materials and Tools

• Fingering or 4-ply cotton yarn in white, pearl, or icy blue — approximately 5–10 g per snowflake
• 2.5 mm crochet hook, or a size that gives you firm stitches
• Tapestry needle
• Scissors
• Blocking mat or foam board
• Rustproof pins
• Small spray bottle
• Optional: fabric stiffener or white glue for stiffening
• Optional: metallic thread or thin ribbon for a hanging loop
• Optional: small pearl or bead for decoration

Crochet Abbreviations

US crochet terms are used throughout the pattern.

• ch – chain
• sl st – slip stitch
• sc – single crochet
• dc – double crochet
• st(s) – stitch(es)

Skill Level

Easy to intermediate

Size and Gauge

Finished diameter: approximately 3.5–4 inches (9–10 cm)

Gauge: Not critical for this project. Work with firm, even tension to help the snowflake keep its shape.

Crochet Snowflake Pattern

Round 1 – The Center

Make a magic ring.

Ch 3. This counts as the first dc.

Work 11 dc into the magic ring. You should have 12 dc in total, including the starting ch-3.

Join with a sl st to the top of the starting ch-3.

Pull the magic ring tight to close the center.

Round 2 – Foundation Loops

Ch 1.

Sc in the same stitch, ch 3.

Repeat from * around, working into each stitch of the previous round. You should have 12 ch-3 spaces.

Join with a sl st to the first sc.

Round 3 – Creating the Petal Base

Sl st into the next ch-3 space.

Ch 3 (counts as the first dc), 2 dc, ch 2, 3 dc in the same ch-3 space. This creates the first shell.

Skip the next sc, sl st into the next ch-3 space, then work 3 dc, ch 2, 3 dc in the same space.

Repeat from * around until you have 12 shells.

Join with a sl st to the top of the starting ch-3.

Round 4 – Forming the Points

Sl st into the next ch-2 space.

Ch 1, sc in the same space, ch 5, sc in the same space.

Move to the next shell and work sc in its ch-2 space, ch 5, sc in the same space.

Repeat from around all 12 shells.

Join with a sl st to the first sc.

Round 5 – Adding the Picot-Style Edges

Sl st into the first ch-5 loop.

Ch 1, then work (sc, ch 3, sc) in the same ch-5 loop.

Repeat (sc, ch 3, sc) in each ch-5 loop around.

Join with a sl st, fasten off, and weave in the ends neatly.

Blocking and Stiffening

Blocking helps open up the snowflake points and gives the finished ornament a more defined shape.

1. Lightly spray the finished snowflake with water until it is damp.
2. Place it on a blocking mat or foam board and gently pin each point, keeping the 12-point shape as even as possible.
3. Allow the snowflake to dry completely, usually for 12–24 hours.
4. If you want a firmer ornament, apply a 50:50 mixture of white glue and water to both sides. Reshape and pin the snowflake again, then allow it to dry completely.

Make sure the snowflake is completely dry before removing the pins.

Finishing the Snowflake

• Add a small metallic thread or thin satin ribbon loop at the top if you want to hang the snowflake as an ornament.
• If desired, sew a small pearl or bead to the center for a decorative detail.
• Use the finished snowflake as a Christmas tree ornament, gift tag, or winter decoration.

Variations

Change the Size

Use a smaller or larger crochet hook to create a different-sized snowflake. Keep your tension firm so the finished piece holds its shape.

Try Different Colors

White is a classic choice, but you can also use cream, icy blue, silver, or other colors that suit your winter decorations.

Add Beads

For extra decoration, sew small seed beads or pearls onto the finished snowflake after blocking and stiffening.

Make a Layered Snowflake

Make two snowflakes and sew them together with the points slightly offset to create a simple layered effect.

Frequently Asked Questions

Is this crochet snowflake pattern beginner-friendly?

This pattern is suitable for crocheters who are comfortable with basic stitches and working in the round. The picot-style edging and shaping require some attention to stitch placement.

How long does one snowflake take to make?

The crocheting itself usually takes about 30–40 minutes, depending on your experience and crochet speed. Blocking and stiffening will add additional drying time.

Can I sell finished snowflakes made from this pattern?

Yes. You may sell finished snowflakes made from this pattern. Please credit AmyLiva Handmade as the pattern designer when sharing or selling your finished items.

How can I make the snowflake sparkle?

You can use metallic thread, sew on small beads or pearls, or add other lightweight decorative details after the snowflake has been blocked and dried.

Pattern Usage

This crochet pattern was designed and written by AmyLiva Handmade.

You may use this pattern to make snowflakes for personal use or small-quantity sale. Please credit AmyLiva Handmade as the pattern designer when sharing or selling finished items made from this pattern.

The written pattern may not be copied, reproduced, translated, or redistributed, in whole or in part.

The post Crochet Snowflake Ornament – Free Crochet Pattern first appeared on Amyliva.

This is a small crochet jewelry project that can be made in a pastel color or any yarn color you prefer. The pattern includes the crochet instructions and the steps for attaching the earring hardware.

Skill Level

Beginner

Materials You’ll Need

• 100% cotton yarn in dusty lavender or another color of your choice
• 2.0 mm crochet hook
• Small amount of polyester fiberfill, optional
• Earring hooks, 1 pair
• Jump rings, 2
• Jewelry pliers
• Tapestry needle
• Scissors
• Stitch marker

Crochet Terms (US)

• MR – Magic Ring
• sc – Single Crochet
• sc2tog – Single Crochet 2 Together
• fpsc – Front Post Single Crochet
• sl st – Slip Stitch
• st(s) – Stitch(es)
• R – Round

Pattern Notes

• The pattern is worked in continuous rounds unless otherwise stated.
• Use a stitch marker to mark the beginning of each round.
• Keep your stitches firm and even so the finished shell holds its shape.
• Make two identical shells for one pair of earrings.
• Add only a small amount of fiberfill if you want the shell to have a slightly raised shape.
• Stitch counts are given in brackets at the end of each round.

Crochet Seashell Pattern

Round 1 – Base

Start with a magic ring.

Work 6 sc into the magic ring.

Pull the ring closed.

[6]

Round 2 – Increase

Work 2 sc in each stitch around.

[12]

Rounds 3–4 – Shell Shape

Work 1 sc in each stitch around for 2 rounds.

[12 each round]

Round 5 – Shell Texture

Continue working around the shell with 12 stitches.

Work the front post single crochet details at evenly spaced intervals to create the raised shell texture, keeping the total stitch count at 12.

[12]

Round 6 – Decrease

Work sc2tog in each stitch around.

[6]

Fasten off, leaving a long yarn tail for closing.

If you want a slightly fuller shell, add a small amount of polyester fiberfill before closing. Use only enough to give the shell some shape without making it too firm.

Closing the Shell

Thread the yarn tail onto a tapestry needle.

Weave the needle through the front loops of the remaining 6 stitches. Pull the yarn gently to close the opening.

Secure the yarn and weave the remaining tail into the crocheted stitches. Trim any excess yarn.

Shaping the Seashell

Gently shape the crocheted shell with your fingers so it keeps its curved form.

If you used fiberfill, adjust it from the outside to distribute it evenly inside the shell.

Make sure the top of the shell is clearly defined before attaching the hardware.

Attaching the Earring Hardware

Use jewelry pliers to open one jump ring by twisting the ends sideways rather than pulling them apart.

Insert the jump ring through the top stitches of the crocheted shell.

Add one earring hook to the same jump ring.

Use the pliers to close the jump ring securely.

Repeat the same steps for the second shell.

Before wearing the earrings, check that each jump ring is completely closed and that the earring hook is securely attached.

Frequently Asked Questions

Is this seashell earring pattern suitable for beginners?

Yes. The crochet portion uses basic stitches, including single crochet, increases, and decreases. The front post single crochet detail in Round 5 is the only stitch that may be unfamiliar to a beginner.

Can I use a different yarn color?

Yes. You can use any cotton yarn color you like. Light or pastel colors work well for a seashell-inspired look, but the pattern can also be made in neutral or brighter colors.

Do I have to use fiberfill?

No. Fiberfill is optional. You can leave the shell unstuffed for a flatter earring or add a small amount if you want a slightly fuller shape.

Can I sell earrings made from this pattern?

Yes. You may sell finished earrings made from this pattern in small quantities. Please credit AmyLiva Handmade as the pattern designer. The written pattern itself may not be copied, reproduced, translated, redistributed, or resold.

How should I clean the earrings?

If cleaning is necessary, gently spot-clean the crocheted part with a small amount of mild soap and water. Avoid soaking the earrings, especially the metal hardware, and allow them to dry completely before wearing them.

Pattern Usage

This crochet pattern is designed and written by AmyLiva Handmade.

You may make finished seashell earrings for personal use, as gifts, or for small-quantity sale. Please credit AmyLiva Handmade as the pattern designer when sharing or selling finished items made from this pattern.

The written pattern may not be copied, reproduced, translated, redistributed, or resold, in whole or in part.

The post Amigurumi Seashell Earrings – Free Crochet Pattern first appeared on Amyliva.

Because this project is intended for babies, the choice of materials and construction is especially important. The rattle insert must be fully enclosed and securely held inside the crocheted ball, and all embroidered details and sewn parts should be firmly attached.

Supplies You’ll Need

• 100% cotton yarn in the colors you prefer
• 2.5 mm crochet hook
• Polyester fiberfill
• A commercially made rattle insert that is fully enclosed and designed for use inside handmade toys
• Embroidery thread for the facial details
• Tapestry needle
• Scissors
• Stitch marker

Abbreviations

MR – Magic Ring

sc – Single Crochet

inc – Increase

dec – Decrease

sl st – Slip Stitch

ch – Chain

st – Stitch

R – Round

Pattern Notes

• Work the ball and handle in continuous rounds unless otherwise stated.
• Use a stitch marker to keep track of the beginning of each round.
• Keep your stitches firm so the stuffing does not easily show through.
• Add fiberfill gradually rather than filling the piece all at once.
• Keep the rattle insert fully enclosed inside the crocheted ball.
• Check your stitch count at the end of each round.

Head (Rattle Ball)

Work in continuous rounds. Use a stitch marker to mark the beginning of each round.

Round 1: MR, 6 sc [6]

Round 2: inc in each st around [12]
Round 3: (sc, inc) x 6 [18]
Round 4: (2 sc, inc) x 6 [24]
Round 5: (3 sc, inc) x 6 [30]
Rounds 6–10: sc in each st around [30]
Round 11: (3 sc, dec) x 6 [24]
Round 12: (2 sc, dec) x 6 [18]

Choose a commercially made rattle insert that fits comfortably inside the crocheted ball with enough room for fiberfill around it. Place the fully enclosed insert inside the ball after Round 12 and keep it centered as you continue crocheting.

Round 13: (sc, dec) x 6 [12]
Round 14: dec x 6 [6]

Add enough stuffing to keep the ball firm without stretching the stitches. Fasten off, leaving a long tail. Weave the tail through the remaining stitches and pull tight to close. Weave in the end securely.

Handle (Grip Section)

Chain 10 and join with a slip stitch to form a ring, being careful not to twist the chain.

Rounds 1–20: sc in each st around [10]

Add a small amount of fiberfill as you work if needed to keep the handle firm.

Fasten off, leaving a long tail. Flatten one end of the handle and sew it securely to the bottom of the rattle ball. Make several passes through the stitches around the join to reinforce the connection.

Flatten the other end of the handle and sew the stitches together securely. Weave the yarn end into the handle and trim any excess.

Assembly

Sew the crocheted handle securely to the bottom of the rattle ball. Make several passes through the stitches around the join to reinforce the connection.

Check the entire rattle carefully to make sure the handle is firmly attached and there are no loose yarn ends or exposed parts.

Optional Decoration

For a decorative version, you can add a simple crochet bow or flower where the handle meets the rattle ball.

If the rattle is intended for a baby or young child, avoid adding bows, flowers, buttons, beads, or other small pieces that could come loose. Keep the finished design simple and make sure all embroidered details are securely stitched.

Related Crochet Patterns

• Mini Amigurumi Cat Keychain Pattern
• Crochet Carrot Keychain Pattern
• Tiny Sea Turtle Keychain Pattern
• Mini Strawberry Amigurumi Pattern
• Frog Keychain on a Crochet Bag

Frequently Asked Questions

Is this pattern suitable for beginners?

Yes. The pattern uses basic stitches and simple shaping. You should be comfortable with a magic ring, single crochet, increases, and decreases before starting.

Can I use a different yarn?

Yes. You can use another yarn weight, but the finished rattle will be a different size. Choose a hook that gives you firm stitches without making the fabric difficult to work.

Can I sell finished rattles made from this pattern?

Yes. You may sell finished items made from this pattern in small quantities. Please credit AmyLiva Handmade as the pattern designer and include a link to amyliva.com when possible.

How should I clean the rattle?

Follow the care instructions for the yarn and rattle insert you use. If the insert is not designed to be washed, avoid soaking the finished rattle. Allow it to dry completely before giving it to a child.

Safety Note

This crochet rattle is a handmade item and should be checked carefully before each use. Make sure the crocheted fabric is intact and that the rattle insert and handle are securely enclosed.

For babies and very young children, use embroidered facial details instead of safety eyes or other small parts. Do not add buttons, beads, or loose decorative pieces.

The finished rattle should be used only with appropriate adult supervision. Follow the manufacturer’s instructions for the rattle insert and other materials you use.

Care and Washing

Check the rattle insert manufacturer’s instructions before washing the finished toy. If the insert is not washable, do not soak or machine wash the rattle.

For a washable version, gently hand wash the crocheted cover with mild soap and cool or lukewarm water. Rinse carefully and press out excess water without wringing. Lay flat or reshape and allow it to dry completely before use.

Do not use bleach, tumble drying, or high heat unless the yarn and rattle insert specifically allow it.

Use and Inspection

Inspect the rattle before each use. Check the crocheted fabric, handle, seams, and enclosed rattle insert for signs of damage or loosening.

Do not give the rattle to a child if the crochet fabric is torn, the handle is coming loose, or any part has become exposed.

Adult supervision is recommended whenever a handmade rattle is used by a baby or young child.

Pattern Usage

This pattern is designed and written by AmyLiva Handmade. You may make finished rattles for personal use, as gifts, or for small-quantity sale.

Please credit AmyLiva Handmade as the pattern designer when sharing or selling finished items made from this pattern and include a link to amyliva.com when possible.

The pattern itself may not be copied, reproduced, translated, redistributed, or resold, in whole or in part.

The post Amigurumi Baby Rattle – Free Crochet Pattern first appeared on Amyliva.