The pieces are crocheted separately and sewn together during assembly. In this pattern, you’ll find the instructions for the head, muzzle, ears, horns, body, legs, and tail, followed by the finishing and assembly steps.

I used beige, cream, and brown yarn for the giraffe shown in the photos, but you can choose different colors if you want to make your own version.

Pattern Details

Skill level: Beginner to intermediate

Finished size: The size will vary depending on the yarn and hook used.

Yarn: DK-weight cotton yarn

Hook size: 2.5–3.0 mm

Construction: The giraffe is made in separate pieces that are sewn together.

Pattern style: Worked mainly in continuous rounds

Materials

• DK-weight cotton yarn in beige or light brown
• Brown yarn for the giraffe spots, horns, and tail tip
• Cream or white yarn for the muzzle and optional inner ears
• 2.5–3.0 mm crochet hook
• Polyester fiberfill
• 8–10 mm safety eyes
• Tapestry needle
• Scissors
• Stitch marker
• Small amount of black yarn for embroidering the nose and mouth

Use a crochet hook that gives you firm, tight stitches. The stuffing should not be visible through the stitches. If you use a different yarn weight or hook size, the finished giraffe will be a different size.

Crochet Abbreviations

• sc – single crochet
• inc – increase
• dec – decrease
• MR – magic ring
• sl st – slip stitch
• FLO – front loop only
• BLO – back loop only
• R – round

This pattern is worked mainly in continuous rounds. Use a stitch marker to mark the beginning of each round and check your stitch count at the end of each round.

Giraffe Amigurumi Pattern

Head – Beige Yarn

Work in continuous rounds using beige yarn.

R1: 6 sc in MR. (6)

R2: inc around. (12)

R3: (sc, inc) × 6. (18)

R4: (2 sc, inc) × 6. (24)

R5: (3 sc, inc) × 6. (30)

R6: (4 sc, inc) × 6. (36)

R7: (5 sc, inc) × 6. (42)

R8: (6 sc, inc) × 6. (48)

R9–R15: sc around. (48)

Place the safety eyes between R11 and R12, leaving approximately 10–12 stitches between them.

R16: (6 sc, dec) × 6. (42)

R17: (5 sc, dec) × 6. (36)

R18: (4 sc, dec) × 6. (30)

R19: (3 sc, dec) × 6. (24)

R20: (2 sc, dec) × 6. (18)

R21: (sc, dec) × 6. (12)

R22: dec around. (6)

Add the stuffing gradually as you work the decreases. Avoid overfilling so the head keeps its shape.

Fasten off, close the opening, and weave in the yarn end.

Muzzle – Cream Yarn

R1: 6 sc in MR. (6)

R2: inc around. (12)

R3: (sc, inc) × 6. (18)

R4: sc around. (18)

Fasten off, leaving a long yarn tail for sewing.

Lightly stuff the muzzle and sew it to the lower front of the head, centered between the eyes.

Using black yarn, embroider a small nose and a short line for the mouth.

Horns – Brown Yarn

Make 2.

R1: 6 sc in MR. (6)

R2: inc around. (12)

R3–R5: sc around. (12)

R6: (sc, dec) × 6. (6)

Lightly stuff each horn.

Fasten off, leaving a long yarn tail for sewing.

Sew the horns securely to the top of the head, positioned slightly apart.

Ears – Beige and Cream Yarn

Make 2.

R1: 6 sc in MR. (6)

R2: inc around. (12)

R3: (sc, inc) × 6. (18)

R4–R5: sc around. (18)

R6: (sc, dec) × 6. (12)

Fasten off, leaving a long yarn tail for sewing.

Do not overstuff the ears. Fold each ear slightly and sew it to the sides of the head, just below the horns.

For a simple inner-ear detail, embroider a few stitches with cream or white yarn. This step is optional.

Body – Beige Yarn

Work in continuous rounds using beige yarn.

R1: 6 sc in MR. (6)

R2: inc around. (12)

R3: (sc, inc) × 6. (18)

R4: (2 sc, inc) × 6. (24)

R5: (3 sc, inc) × 6. (30)

R6–R12: sc around. (30)

R13: (3 sc, dec) × 6. (24)

R14: (2 sc, dec) × 6. (18)

R15: (sc, dec) × 6. (12)

R16: dec around. (6)

Stuff the body firmly as you work, but avoid overfilling it.

Fasten off, close the opening, and weave in the yarn end.

Front Legs – Beige Yarn

Make 2.

R1: 6 sc in MR. (6)

R2: inc around. (12)

R3: (sc, inc) × 6. (18)

R4–R6: sc around. (18)

R7: (sc, dec) × 6. (12)

R8–R10: sc around. (12)

R11: dec around. (6)

Lightly stuff the lower part of each leg. Do not overfill the legs, so they remain easy to sew to the body.

Fasten off, leaving a long yarn tail for sewing.

Sew the hind legs securely to the lower sides of the body. Position them evenly so the giraffe can sit upright.

Tail – Beige Yarn

R1: 6 sc in MR. (6)

R2–R5: sc around. (6)

Fasten off, leaving a long yarn tail for sewing.

Sew the tail to the back of the body. To finish the tail, attach a small brown yarn tuft to the end.

Giraffe Spots – Brown Yarn

The brown spots can be embroidered directly onto the crocheted pieces after they are finished.

Use brown yarn and make small, uneven shapes with simple stitches. Vary the size and shape of the spots instead of making them all identical. Add spots to the head, body, and legs, leaving some beige areas visible between them.

There is no fixed number or placement for the spots, so you can arrange them to suit the look you want. If you prefer a simpler design, you can also use fewer spots.

Face Details and Assembly

1. Embroider a small black nose on the cream muzzle and add a short line below it for the mouth.
2. If desired, add a few small embroidery stitches on each side of the muzzle for whisker details.
3. If you have not already attached them, sew the ears and horns securely to the head.
4. Sew the head firmly to the top of the body, making sure it is centered.
5. Sew the hind legs to the lower sides of the body and attach the front legs below the neck area.
6. Sew the tail to the back of the body.
7. Add the brown spots if you have not already done so.
8. Weave in and trim all remaining yarn ends.

Check all sewn-on parts to make sure they are secure before using the finished giraffe as a toy.

Frequently Asked Questions

Can I use a different yarn color?

Yes. You can change the yarn colors to suit your preference. Beige, cream, and brown give the giraffe a traditional look, but other color combinations can also work well.

Can I use a different yarn weight?

Yes. You can use a different yarn weight, but the finished giraffe will be a different size. Choose a crochet hook that gives you firm stitches so the stuffing does not show through.

Do I have to add the brown spots?

No. The spots are optional. You can add more or fewer spots, change their size, or leave them off for a simpler design.

Can I use embroidered eyes instead of safety eyes?

Yes. If the giraffe is intended for a young child, embroidered eyes are a safer option than safety eyes. Make sure all embroidered details and sewn pieces are secure.

Safety and Care

If you are making this giraffe for a young child, replace the safety eyes with securely embroidered eyes. Safety eyes can present a choking risk if they become detached.

Check the seams and attached pieces regularly, especially if the giraffe is used as a toy. Make sure the horns, ears, legs, tail, and other sewn details remain securely attached.

To clean the finished giraffe, gently spot-clean it with a damp cloth when needed. Allow it to air dry completely before using or storing it.

Keep the finished toy away from open flames and excessive heat.

The post Crochet Giraffe Amigurumi – Free Crochet Pattern first appeared on Amyliva.

Because this project is intended for babies, the choice of materials and construction is especially important. The rattle insert must be fully enclosed and securely held inside the crocheted ball, and all embroidered details and sewn parts should be firmly attached.

Supplies You’ll Need

• 100% cotton yarn in the colors you prefer
• 2.5 mm crochet hook
• Polyester fiberfill
• A commercially made rattle insert that is fully enclosed and designed for use inside handmade toys
• Embroidery thread for the facial details
• Tapestry needle
• Scissors
• Stitch marker

Abbreviations

MR – Magic Ring

sc – Single Crochet

inc – Increase

dec – Decrease

sl st – Slip Stitch

ch – Chain

st – Stitch

R – Round

Pattern Notes

• Work the ball and handle in continuous rounds unless otherwise stated.
• Use a stitch marker to keep track of the beginning of each round.
• Keep your stitches firm so the stuffing does not easily show through.
• Add fiberfill gradually rather than filling the piece all at once.
• Keep the rattle insert fully enclosed inside the crocheted ball.
• Check your stitch count at the end of each round.

Head (Rattle Ball)

Work in continuous rounds. Use a stitch marker to mark the beginning of each round.

Round 1: MR, 6 sc [6]

Round 2: inc in each st around [12]
Round 3: (sc, inc) x 6 [18]
Round 4: (2 sc, inc) x 6 [24]
Round 5: (3 sc, inc) x 6 [30]
Rounds 6–10: sc in each st around [30]
Round 11: (3 sc, dec) x 6 [24]
Round 12: (2 sc, dec) x 6 [18]

Choose a commercially made rattle insert that fits comfortably inside the crocheted ball with enough room for fiberfill around it. Place the fully enclosed insert inside the ball after Round 12 and keep it centered as you continue crocheting.

Round 13: (sc, dec) x 6 [12]
Round 14: dec x 6 [6]

Add enough stuffing to keep the ball firm without stretching the stitches. Fasten off, leaving a long tail. Weave the tail through the remaining stitches and pull tight to close. Weave in the end securely.

Handle (Grip Section)

Chain 10 and join with a slip stitch to form a ring, being careful not to twist the chain.

Rounds 1–20: sc in each st around [10]

Add a small amount of fiberfill as you work if needed to keep the handle firm.

Fasten off, leaving a long tail. Flatten one end of the handle and sew it securely to the bottom of the rattle ball. Make several passes through the stitches around the join to reinforce the connection.

Flatten the other end of the handle and sew the stitches together securely. Weave the yarn end into the handle and trim any excess.

Assembly

Sew the crocheted handle securely to the bottom of the rattle ball. Make several passes through the stitches around the join to reinforce the connection.

Check the entire rattle carefully to make sure the handle is firmly attached and there are no loose yarn ends or exposed parts.

Optional Decoration

For a decorative version, you can add a simple crochet bow or flower where the handle meets the rattle ball.

If the rattle is intended for a baby or young child, avoid adding bows, flowers, buttons, beads, or other small pieces that could come loose. Keep the finished design simple and make sure all embroidered details are securely stitched.

Related Crochet Patterns

• Mini Amigurumi Cat Keychain Pattern
• Crochet Carrot Keychain Pattern
• Tiny Sea Turtle Keychain Pattern
• Mini Strawberry Amigurumi Pattern
• Frog Keychain on a Crochet Bag

Frequently Asked Questions

Is this pattern suitable for beginners?

Yes. The pattern uses basic stitches and simple shaping. You should be comfortable with a magic ring, single crochet, increases, and decreases before starting.

Can I use a different yarn?

Yes. You can use another yarn weight, but the finished rattle will be a different size. Choose a hook that gives you firm stitches without making the fabric difficult to work.

Can I sell finished rattles made from this pattern?

Yes. You may sell finished items made from this pattern in small quantities. Please credit AmyLiva Handmade as the pattern designer and include a link to amyliva.com when possible.

How should I clean the rattle?

Follow the care instructions for the yarn and rattle insert you use. If the insert is not designed to be washed, avoid soaking the finished rattle. Allow it to dry completely before giving it to a child.

Safety Note

This crochet rattle is a handmade item and should be checked carefully before each use. Make sure the crocheted fabric is intact and that the rattle insert and handle are securely enclosed.

For babies and very young children, use embroidered facial details instead of safety eyes or other small parts. Do not add buttons, beads, or loose decorative pieces.

The finished rattle should be used only with appropriate adult supervision. Follow the manufacturer’s instructions for the rattle insert and other materials you use.

Care and Washing

Check the rattle insert manufacturer’s instructions before washing the finished toy. If the insert is not washable, do not soak or machine wash the rattle.

For a washable version, gently hand wash the crocheted cover with mild soap and cool or lukewarm water. Rinse carefully and press out excess water without wringing. Lay flat or reshape and allow it to dry completely before use.

Do not use bleach, tumble drying, or high heat unless the yarn and rattle insert specifically allow it.

Use and Inspection

Inspect the rattle before each use. Check the crocheted fabric, handle, seams, and enclosed rattle insert for signs of damage or loosening.

Do not give the rattle to a child if the crochet fabric is torn, the handle is coming loose, or any part has become exposed.

Adult supervision is recommended whenever a handmade rattle is used by a baby or young child.

Pattern Usage

This pattern is designed and written by AmyLiva Handmade. You may make finished rattles for personal use, as gifts, or for small-quantity sale.

Please credit AmyLiva Handmade as the pattern designer when sharing or selling finished items made from this pattern and include a link to amyliva.com when possible.

The pattern itself may not be copied, reproduced, translated, redistributed, or resold, in whole or in part.

The post Amigurumi Baby Rattle – Free Crochet Pattern first appeared on Amyliva.